EL6695 EtherCAT桥接终端实现了EtherCAT终端线束与不同主机之间的实时数据交换。还支持通过AoE、FoE、EoE、NPI等进行异步通信。分布式时钟的同步在两个方向上都是可能的。EL6695与EL6692(将继续提供)的不同之处在于灵活的CoE配置、设备仿真选项和数据吞吐量的显著提高。与EL6692一样,TwinCAT System Manager中提供了一个方便的配置界面。二次侧(RJ45)的电源通过外部连接,一次侧通过E总线供电。网桥终端也可用于集成下级PC系统作为EtherCAT从机。
EtherCAT网络之间的数据交换可以通过Beckhoff组件以多种方式实现,以满足不同的系统需求。因此,还应使用下面列出的“类似产品”、FCxxxx现场总线卡或各种CX嵌入式PC上的B110接口检查可能性。
EL6695 | EtherCAT Terminal, communication interface, EtherCAT bridge, extended functions
Technical data |
EL6695 |
Technology |
primary side: E-bus (terminal strand), secondary side: 2 x 100 Mbit/s Ethernet, RJ45, In/Out |
Ports |
primary: E-bus, secondary: 2 x RJ45 EtherCAT input/output |
Function |
EtherCAT distributed clock synchronization, data exchange |
Cable length |
100 m 100BASE-TX, secondary port |
Hardware diagnostics |
status LEDs |
Power supply |
primary: via the E-bus, secondary: via connector, 24 V |
Distributed clocks |
yes |
Electrical isolation |
500 V (E-bus/secondary side) |
Current consumption |
primary: E-bus 400 mA; secondary: 70 mA/24 V |
Bit width in the process image |
max. 3 kbyte per direction (dependent on the EtherCAT master, TwinCAT currently max. 1400 byte) |
Special features |
usable in TwinCAT as a reference clock, synchronous data exchange, flexible PDO mapping, supports AoE, EoE, FoE, VoE |
Weight |
approx. 75 g |
Operating/storage temperature |
0…+55 °C/-25…+85 °C |
Relative humidity |
95 %, no condensation |
Vibration/shock resistance |
conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission |
conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. rating/installation pos. |
IP20/variable |
Approvals/markings |
CE, UL |
-
Technical data
-
Housing data
To top
Housing data |
EL-24 |
Design form |
compact terminal housing with signal LEDs |
Material |
polycarbonate |
Dimensions (W x H x D) |
24 mm x 100 mm x 52 mm |
Installation |
on 35 mm DIN rail, conforming to EN 60715 with lock |
Side by side mounting by means of |
double slot and key connection |
Marking |
– |
Wiring |
specific push-in connection
|