FIREYE一直站在工业控制领域前沿，致力于创新数字化连接和启用的工业设备和系统。设法提高公用事业，工业，运输和基础设施的效率，安全性和生产力。
FIREYE主营产品：仪器仪表、DCS、晶闸管、励磁、传动及配件、模块、电机、传感器、接触器等。
FIREYE火焰检测器85UVF/IRF系列技术参数
|
Housing Material:
|
Engineered material - GE Valox
|
|
Scanner Weight: 3
|
30 lbs (1.5kg)
|
|
Temperature Rating:
|
-40°F/-40°C [Ta ]150°F/+65°C; -40°F/-40°C [ scanner internal temperature ] 180 °F/82°C
|
|
Humidity:
|
0% to 95% relative humidity, non-condensing
|
|
Pollution Degree:
|
2
|
|
Overvoltage Category:
|
III
|
|
Source:
|
Clean, dry, cool
|
|
Pressure:
|
Adequate to overcome furnace or windbox pressure
|
|
Input Power:
|
24 Vdc nominal, +20%, -15% supply current 200 mA
|
|
Electrical Connection:
|
8-PIN quick-disconnect
|
|
Relay Outputs:
|
FLAME RELAY, SPST (N.O.)
FAULT RELAY, SPST (N.C.)
|
|
Contact Rating:
|
Minimum: 10 mA @ 5 Vdc
Maximum: 2 A @ 30 Vdc, 2 A @ 230 Vac (Resistive load)
|
|
Analog Output:
|
Optically isolated 4 to 20mA dc current referenced to 24 Vdc common,maximum connected load: 750 Ohms. Fireye recommends the 60-2685-X 24 Vdc power supply for best performance and for a SELV rating of the 4-20mA analog output leads.
|
|
Status Indication:
|
Multiple LED indication for flame signal strength, flame relay, ready,target, background select and fault codes
|
FIREYE火焰检测器85UVF/IRF系列介绍
Fireye Phoenix 85UVF/IRF 型火焰扫描仪是基于微处理器的设备，采用固态火焰检测传感器。 Phoenix 火焰扫描仪包含一个带有自动设置开/关阈值的内部火焰继电器，因此无需远程火焰放大器或火焰开关。
Phoenix 扫描仪检测目标火焰中发生的宽频率调制的幅度（火焰“闪烁”）。在扫描仪设置过程中，火焰扫描仪会自动存储目标火焰的幅度以及最佳开/关标准。自动选择适当的传感器增益。 Phoenix 扫描仪包含完整的自我诊断和电子自我检查。
The Fireye Phoenix type 85UVF/IRF flame scanners are microprocessor based devices utilizing a solid state flame detection sensor. The Phoenix flame scanners incorporate an internal flame relay with automatically set ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier or flame switch.
Phoenix scanners detect the amplitude of the modulations (the flame “flicker”) that occur within the targeted flame, over a wide frequency. During the scanner setup procedure, the amplitudes of the target flame are automatically stored by the flame scanner, together with optimum ON/OFF criteria. The appropriate sensor gain is automatically selected. Phoenix scanners incorporate full self diagnostics and electronic self checking.
FIREYE火焰检测器85UVF/IRF系列其他常用型号：
FIREYE 85UVF1-1QD
FIREYE 85UVF1-1CEX
FIREYE 85UVF1-1CEX-K3
FIREYE 85IRF1-1QD
FIREYE 85IRF1-1CEX
FIREYE 85IRF1-2QD
FIREYE 85UVF1-2QD
FIREYE 85UVF1-1QDK3
FIREYE 85UVF1-2QDK3
FIREYE 85IRF4-1QDWR
FIREYE 85IRF4-2QDWR
FIREYE 85UVF4-1QDWR
FIREYE 85UVF4-1QDK3WR
FIREYE 85UVF4-2QDWR
FIREYE 85UVF4-2QDK3WR