Sensorex相信即使是最复杂的水分析也应该快速简单地执行。Sensorex专门设计和制造pH电极，ORP电极，电导率和TDS传感器，以及其他电化学和光学测量技术。
SENSOREX产品有：传感器，控制器，变送器等等。
SENSOREX位移传感器SX12V系列技术参数
|
General specifications at +25°C
|
|
Electrical stroke
|
±12.5mm to ±150mm
|
|
Primary sine excitation
|
2.2Vrms nominal (6V peak to peak)
|
|
Excitation frequency
|
3500 Hz nominal (400Hz to 15kHz)
|
|
Consumption
|
≤10mW
|
|
Non linearity
|
< ±0.3% of full scale
|
|
Resolution et hysteresis
|
Non measurable
|
|
Zero null voltage
|
≤0.5% of full scale
|
|
Sensitivity thermal drift
|
≤300ppm/°C
|
|
Dielectric strength
|
500Vdc/ 1 min
|
|
Insulation resistance
|
≥1 Mohm
|
SENSOREX位移传感器SX12V系列介绍及选型
Characteristics
Core glued and crimped
Connector or PTFE cable output
Threaded end and zero mechanical setting
Pressureproof by O ring on diameter 12 housing
Diameter 12 steel housing (Fe-Ni 50), core in blackened XC10 steel
Description
Meggitt (Sensorex) SX12V sensor is specially designed for servo-actuator’s pressure chamber.
It can resist to a static pressure of 350 bar.
It has a threaded end, necessary for its fixation and for the zero mechanical adjustment.
This sensor SX12V exists in two versions :
6 pins connector output
PTFE cable output (4 wires)
This sensor is an AC/AC LVDT ; it has to be used with a conditioning unit model SX3120, SX9130…
特征
核心粘合和压接
连接器或 PTFE 电缆输出
螺纹端和零机械设置
直径 12 外壳上的 O 形圈耐压
直径 12 钢外壳 (Fe-Ni 50)，黑色 XC10 钢芯
描述
Meggitt (Sensorex) SX12V 传感器专为伺服执行器的压力室设计。
它可以抵抗 350 bar 的静压。
它有一个螺纹端，这是其固定和零机械调整所必需的。
该传感器 SX12V 有两个版本：
6针连接器输出
PTFE 电缆输出（4 线）
该传感器是 AC/AC LVDT； 它必须与 SX3120、SX9130 型号的调节单元一起使用……
SENSOREX位移传感器SX12V系列其他型号
SENSOREX 690110270
SENSOREX 69011027 1
SENSOREX 690110272
SENSOREX 690110273
SENSOREX 690110274
SENSOREX 690110268
SENSOREX 690110303
SENSOREX 690110300
SENSOREX 690100043
SENSOREX 690100044
SENSOREX 690100045
SENSOREX 690100046
SENSOREX 690 100047
SENSOREX 690100048
SENSOREX 690100086
SENSOREX 690100049
SENSOREX SX12V025