GO REGULATOR调节器和阀门旨在满足广泛的应用，控制压力，同时适应许多气体和液体的低至中等流速。
GO REGULATOR 提供全面的标准化和专业压力调节器、隔膜阀和过滤器产品组合。
GO调节阀HPR-2系列技术参数
|
CONSTRUCTION
|
316L stainless steel
|
|
ADJUSTABLE PRESSURE CONTROL RANGES
|
0–10, 0–25, 0–50, 0–100, 0–250,0-500, 0-750 and 0–1000 psig
|
|
INLET PRESSURE
|
up to 6000 psig at 380° F (193° C)
|
|
OPERATING TEMPERATURE
|
up to 500° F (260° C)
|
|
CV COEFFICIENT
|
0.06, 0.025, 0.2
|
|
INLET CONNECTIONS
|
1⁄8 ˝ FNPT
|
|
OUTLET CONNECTIONS
|
¼˝ FNPT
|
GO调节阀HPR-2系列产品介绍
HPR-2系列加热压力调节器被设计用于为进入仪表系统的样品提供热量。它可用于预热液体，防止气体冷凝或在气体分析前蒸发液体。HPR-2的模块化设计由热交换器和压力控制部分组成。压力控制部分是经过PR-1调压器设计，提供了同样优秀的出口压力稳定性。换热器部分由本体和换热元件组成。热交换元件采用氧化石墨烯调节器独特的螺旋包裹屏幕作为热交换器表面。这个屏幕有高达100平方英寸的传热面积，精确的设计迫使所有的样品流通过元件。
The HPR-2 Series heated pressure regulator is designed to supply heat to samples entering instrumentation systems. It can be used to preheat liquids, to prevent condensation of gases or to vaporize liquids prior to gas analysis.The modular design of the HPR-2 consists of heat exchanger and pressure control sections. The pressure control section is patterned after the time-proven design of the PR-1 pressure reducing regulator and provides the same excellent outlet pressure stability. The heat exchanger section is made up of a body and heat exchange element. The heat exchange element uses GO Regulator's unique spiral-wrapped screen as the heat exchanger surface. This screen has up to 100 square inches of heat transfer area and precise design forces all sample fl ow to pass through the element.
GO REGULATOR调节阀HPR-2系列其他常用型号：
GO REGULATOR H2-1Z55Q3C1114
GO REGULATOR H2-1Z55B3E111
GO REGULATOR H2-1Z55B3E1114
GO REGULATOR H2-1Z55Q3C1110
GO REGULATOR H2-1Z55Q3C1144
GO REGULATOR H2-1Z55Q3C1174
GO REGULATOR H2-1Z55Q3C11J4