自 1987 年以来，CELTRON公司成立并销售各种类型的称重传感器产品。
CELTRON称重传感器LPS系列技术参数
|
SPECIFICATIONS
|
|
PARAMETER
|
VALUE
|
UNIT
|
|
NTEP/OIML accuracy class
|
NTEP I|I
|
Non-Approved
|
C3
|
|
|
Maximum no. of intervals (n)
|
5000 single (1)
|
1000
|
3000 (2)
|
|
|
Y = Emax/Nmin
|
8000
|
1400
|
6000
|
Maximum available 12000
|
|
Standard capacities (Emax)
|
0.6, 1, 2, 3, 6, 10, 15, 20, 30, 35, 60, 100, 200
|
kg
|
|
Rated output- - R.O.
|
2.0
|
mV/V
|
|
Rated output tolerance
|
10
|
±% of rated output
|
|
Zero balance
|
3
|
±% of rated output
|
|
Non-linearity
|
0.025
|
0.030
|
0.020
|
±% of rated output
|
|
Hysteresis
|
0.025
|
0.030
|
0.020
|
±% of rated output
|
|
Non-repeatability
|
0.020
|
±% of rated output
|
|
Creep error (20 minutes)
|
0.030
|
0.030
|
0.017
|
±% of rated output
|
|
Zero return (20 minutes)
|
0.030
|
0.030
|
0.017
|
±% of rated output
|
|
Temperature effect on min. dead load output
|
0.0026
|
0.0026
|
0.014
|
±% of rated output/°C
|
|
Temperature effect on sensitivity
|
0.0015
|
0.0015
|
0.008
|
±% of applied load/°C
|
|
Compensated temperature range
|
-10 to +40
|
°C
|
|
Operating temperature range
|
-20 to +60
|
°C
|
|
Safe overload
|
150
|
% of R.C.
|
|
Ultimate overload
|
200
|
% of R.C.
|
|
Excitation, recommended
|
10
|
VDC or VAC RMS
|
|
Excitation, maximum
|
15
|
VDC or VAC RMS
|
|
Input impedance
|
410±10
|
Ω
|
|
Output impedance
|
350±3
|
Ω
|
|
Insulation resistance
|
>5000
|
MΩ
|
|
Construction
|
Anodized aluminum
|
|
|
Environmental protection
|
IP66
|
|
CELTRON称重传感器LPS系列介绍
The Model LPS is designed for electronic scales and platform scales where only one load cell can be used and low proile is required. It is the lightest model of Celtron single-point load cell family. The design is most suitable for mass production operations.
The LPS is constructed of anodized aluminum and is fully potted to IP66 levels, providing excellent protection against moisture ingression.
FEATURES
• Capacities: 0.6 to 200 kg
• Small size with low proile
• Anodized aluminum
• NTEP Class III 5000S approval from 3 kg to 30 kg
• OIML C3 approval from 6 kg to 35 kg
• Platform size: 16”x16”/ 40 cm x 40 cm
• Optional
APPLICATIONS
• Packaging machines
• Dosing/illing
• Belt scales/conveyor scales
• In-motion check weigher
• Retail scales/counting scales
LPS型设计用于只能使用一个称重传感器且需要低高度的电子秤和平台秤。它是单点称重传感器系列中最轻的型号。该设计适合批量生产操作。
LPS由阳极氧化铝制成，完全封装到 IP66 级别，提供出色的防潮保护。
特征
• 容量：0.6至200公斤
• 小尺寸，低调
• 阳极氧化铝
• NTEP Class III 5000S认证从3 kg到30 kg
• OIML C3认证从6公斤到35公斤
• 平台尺寸：16”x16”/40 cm x 40 cm
• 可选
应用
• 包装机
• 给药/填充
• 皮带秤/传送带秤
• 动态检重秤
• 零售秤/计数秤
CELTRON称重传感器LPS系列其他常见型号：
CELTRON LPS-100KG
CELTRON LPS-60KG
CELTRON LPS-200KG
CELTRON LPS-30KG
CELTRON LPS-35KG
CELTRON LPS-6KG
CELTRON LPS-10KG
CELTRON LPS-15KG
CELTRON LPS-20KG
CELTRON LPS-0.6KG
CELTRON LPS-1KG
CELTRON LPS-2KG
CELTRON LPS-3KG