J.SCHNEIDER自成立75年以来，凭借创新和成长已成为全球市场上优质的电源供应商之一。
J.SCHNEIDER的主营产品有变压器，反应器，电抗器，电源和转换器等。
J.SCHNEIDER电源C-TEC 2410-1技术参数
|
Input
|
|
|
Nominal input voltage*
|
12 V DC / 24 V DC (SELV / PELV)
|
|
Input voltage range in charge mode
Nominal input voltage 12 V DC (decoupled / non-decoupled)
Nominal input voltage 24 V DC (decoupled / non-decoupled)
|
1.9…17.4 V DC ±0 % / 11.4…17.4 V DC ±0 %
23.9…27 V DC ±0 % / 23.4…27 V DC ±0 %
|
|
Nominal input current
|
10 A @ (Ue = 24.0 V DC, Ua = 23.2 V DC, Ia = 9.9 A
|
|
Inrush current
|
≤ 35 A / 2 ms
|
|
Charging current
|
Max. 7 A; active charging current control
|
|
Nominal input power
|
240 W @ (Ue = 24.0 V DC, Ua = 23.2 V DC, Ia = 10 A)
|
|
Output
|
|
|
Nominal output voltage
|
12 V DC / 24 V DC
|
|
Nominal output voltage in buffer mode (system voltage)**
Nominal input voltage 12 V DC
Nominal input voltage 24 V DC
|
11.2 V DC ±4 %
23.2 V DC ±2 %
|
|
Nominal output current
|
10 A
|
|
Current limitation in discharge operation
|
11.25 A ±0.75 A
|
|
Limiting current monitoring in discharge operation by switching-off
|
10.3 A ±0,1 A after 1.5 s
|
|
Energy capacity (typical) NCPA0606G01
|
2,0 kJ (kWs) @ (Ua = 23.2 V DC, Ia = 2 A)
|
|
Efficiency
|
95,1 % @ (Ue = 24.0 V DC, Ua = 23.2 V DC, Ia = 10 A)
|
|
Internal consumption in buffer mode
|
1.7 W
|
|
Short-circuit resistance
Mains operation
Buffer mode
|
Conditional short-circuit proof
Short-circuit proof
|
|
Fuse
|
|
|
Fuse output circuit
|
External
|
|
General
|
|
|
Protection class of the housing
|
IP20
|
|
Overvoltage category
|
II
|
|
Pollution degree
|
2
|
|
Dimensions (H x W x D)
|
6.78 in x 2.78 in x 5.65 in (172 mm x 70 mm x 143 mm)
|
|
Weight
|
2.87 lbs (1.3 kg)
|
|
Operating temperature / storage temperature
Operating temperature UL tested
|
-40 °F(-40 °C)...140 °F (+60 °C)
50 °F (+10 °C)...140 °F (+60 °C)
|
|
Relative humidity
|
≤95 % non-condensing
|
|
Max. height above sea level (without power reduction)
|
6561.1 ft (2000 m)
|
J.SCHNEIDER电源C-TEC 2410系列介绍
C-TEC系列的直流UPS在外壳超地图内部作为储能。在电源运行中，超地图将由外部控制的直流电源充电。如果直流电源中断，超短地图的能量将以可控的方式释放。负荷将被供给，直到C-TEC排出。缓冲时间取决于输出电流和超空映射的能量。
C-TEC2410具有以下特性：
• 由于耐用的超地图而免维护
• 微控制器支持超地图的充放电
• 通过led进行运行监控和充电状态监控
• 通过主动电流充电控制进行快速充电
• IPC管理按时间触发和输出电流触发关机功能
• 通过USB接口进行的许多客户特定的参数化设置
The DC UPS of the C-TEC series has inside of the housing ultracaps as energy storage.In mains operation, the ultracaps will be charged by an external controlled DC power supply.In the event of interruption of DC power supply, the energy of the ultracaps will be released in a controlled way. The load will be fed until the C-TEC is discharged.The buffer time depends on the output current and the energy of the ultracaps.
The C-TEC 2410 is characterized by the following properties:
• Maintenance-free due to durable ultracaps
• Micro-controller supported charging and discharging of the ultracaps
• Operation monitoring and charge status monitoring by LEDs
• Fast charging by active current charging control
• IPC management by time triggered and output current triggered shutdown function
• Numerous customer-specific parametrization settings by USB interface
J.SCHNEIDER电源C-TEC系列其他常用型号：
J.SCHNEIDER C-TEC 1203-1
J.SCHNEIDER C-TEC 2403-1
J.SCHNEIDER C-TEC 2403 USB
J.SCHNEIDER C-TEC 2410-1
J.SCHNEIDER C-TEC 2410 2kJ
J.SCHNEIDER C-TEC 2410 5,8kJ
J.SCHNEIDER C-TEC 2410 13,4kJ
J.SCHNEIDER C-TEC 2410 27,6kJ
J.SCHNEIDER C-TEC 2420-8
J.SCHNEIDER C-TEC 1225 P
J.SCHNEIDER C-TEC 2425 P