MONITEUR DEVICES公司于1992 年，其使命是为过程工业提供优质的阀门状态和控制解决方案。MONITEUR DEVICES公司开发和制造用于自动化阀门的阀门位置指示器、旋转限位开关和阀门定位器
MONITEUR DEVICES阀位指示器AMYB系列技术参数
|
Nema Rating
|
4, 4X, 7, 9
|
|
Housing / Cover
|
Aluminum
|
|
Indicator Cover
|
Ektar
|
|
Seals
|
BUNA-N
|
|
Fasteners
|
Stainless Steel
|
|
Terminal Points
|
14
|
|
Weight
|
4.25 lbs.
|
|
Operating Temp.
|
-40° F to 175° F
|
MONITEUR DEVICES阀位指示器Sentinel系列介绍
阀位指示器应为Moniteur型AMYB-E240/AMYB-5240/AMYB-1240。外壳应为带有聚氨酯涂层的铝制外壳，等级为 Nema 4、4X、7、9。视觉指示器应具有 100% 显示变化、360° 可视性和全设定点可调节性。指示器盖应无贴花或油漆，并用O形圈密封。
外壳应有固定盖螺栓。外壳轴应连接到带有内部不锈钢锁定环的烧结黄铜轴承座上，并使用O形环进行环保保护。开关/传感器类型应为钨TTL密封接近类型，额定3A - 125 VAC / 2A - 24VDC。总共应包括四 (4) 个开关以及 14 个终端点。
所有开关和端子必须封闭并单独标记以供识别。端子排必须采用角度安装，以便于安装。
Valve position transmitter shall be Moniteur model AMYB-E240/AMYB-5240/AMYB-1240. Enclosure shall be aluminum with a polyurethane coating and rated Nema 4, 4X, 7, 9. Visual indicator shall have 100% display change, 360° visibility and full set point adjustability. Indicator cover shall be free of decals or paint and sealed with an O-ring.
Enclosure shall have captive cover bolts. Enclosure shaft shall be attached to a sintered brass housing bearing with an internal stainless steel locking ring, environmentally protected with an O-ring. The switch/sensor type shall be Tungsten TTL Hermetically Sealed Proximity Type rated 3A - 125 VAC / 2A - 24VDC. A total of four (4) switches shall be included along with 14 terminal points.
All switches and terminals must be enclosed and individually marked for identification. Terminal strip must be angle-mounted for easier installation.
MONITEUR DEVICES阀位指示器Sentinel系列其他常用型号：
MONITEUR DEVICES AMYB-E240
MONITEUR DEVICES AMYB-5240
MONITEUR DEVICES AMYB-1240