BINMASTER设计和制造优质的固态点和连续料位指示器，控制系统以及在存储粉末和散装固体时使用的传感设备。该公司是Garner Industries的子公司。
BINMASTER产品有：雷达，指示器，电容和开关等。
BINMASTER旋转液位指示器BMRX系列技术参数
|
Supply:
|
12 VDC to 24 VDC
|
|
Supply Tolerance:
|
±10%
|
|
Load:
|
5.5 VA
|
|
Ambient Temperature: (Electronics)
|
-40°F to +185°F (-40°C to +85°C)
|
|
Enclosure:
|
NEMA 4X IP66
Die cast aluminum, FDA recognized powder coat finish
|
|
DPDT Relay Output:
|
10 Amps 250 VAC
|
|
Fail-Safe:
|
Switch selectable “High” or “Low” level modes
|
|
Mounting:
|
1-1/4” NPT
|
|
Conduit Entry:
|
3/4” NPT
|
|
Shaft Seal:
|
1/2 micron, 30 PSI
|
BINMASTER旋转液位指示器BMRX系列介绍
BinMaster BMRX是一个旋转桨式水平传感器，为散装固体提供可靠的点水平检测，包括粉末、颗粒和颗粒材料。该装置有一个开关可选择的故障安全继电器开关，在断电时将降至“安全”状态。
BMRX电机以1转/分的转速旋转驱动轴和划桨。当容器材料填充到指示桨的水平时，材料会导致桨停止旋转，指示覆盖状态。当材料脱落时，桨再次开始旋转，以表明未覆盖的状态。
The BinMaster BMRX is a rotating paddle style level sensor which provides reliable point level detection for bulk solids, including powders, pellets, and granular materials. The unit has a switch selectable fail-safe relay that will fall to a "safe" condition in the event of a power failure.
The BMRX motor rotates the drive shaft and paddle at 1 RPM. When the vessel material fills to the level of the indicator paddle, the material causes the paddle to stop rotating indicating a covered condition. When the material falls away, the paddle starts rotating again to indicate an uncovered condition.
BINMASTER旋转液位指示器BMRX系列其他常用型号：
BINMASTER BMRX-24VDC
BINMASTER BMRX-115VAC
BINMASTER BMRX-230VAC
BINMASTER BMRX-24VAC