TALGIL成立于1987年。TALGIL是开发、生产、销售和服务于开放领域、温室、市政和住宅应用的灌溉控制系统。
TALGIL反吹控制器FILTRON 1-10技术参数
|
General Features:
|
|
|
Outputs
|
The modular structure enables from 2 to 10 outputs in steps of 2
In the DC model – 2 Wired 12V DC pulse Latching solenoids
In the AC model – 24V AC solenoids
|
|
Inputs
|
Built-in analog DP sensor
Input for external digital (dry contact) DP sensor
Input for digital low pressure sensor
|
|
Modes of operation:
|
Flushing triggered by Pressure Differential only
Flushing triggered by time only
Flushing triggered either by Pressure Differential or by time, the one that occurs first
Manual flushing
|
|
User selectable parameters:
|
Flushing time per station
Differential pressure set point
Flushing interval
Main valve (Down Stream Valve) Yes / No
Pre dwell and Dwell delay times
DP response time
Looping limit - consecutive back flush cycles
Alarm output for external controller Yes / No
Pressure units BAR or PSI
|
|
Logging:
|
Number of cycles triggered by time
Number of cycles triggered by DP
Number of cycles triggered manually
|
|
Alarms:
|
Endless looping of consecutive back flush cycles
Low pressure indication
Low battery
|
|
Real time displayed information:
|
Actual pressure differential value
During the flushing process showing the active output at each stage
Between the flushing cycles showing the left time until next cycle
|
|
Energizing options:
|
In the DC model - 4 standard “D” type alkaline batteries or 12V DC from external source
In the AC model - built in 220/ 110 v AC power supply
|
TALGIL反吹控制器FILTRON 1-10介绍
The FILTRON 1-10 is a professional modular backflush controller for up to 10 filters.
The different modules are 2/4/6/8/10 outputs. The outputs can operate a 12V DC latch solenoids or 24V AC solenoids, depending if it is a DC or AC version.
It includes a robust and accurate embedded differential pressure sensor, which can survive a pressure of up to 18 bars. Optionally an external mechanical DP sensor can be used. The FILTRON 1-10 also allows connecting an external pressure sensor (Also called Presostat), and thus preventing the controller from performing unnecessary backflush cycles when there is no irrigation. The backflush process can be triggered by time, by DP or both. The controller has a big customized LCD screen which shows all the backflush parameters, actual status, actual DP value and backflush statistics.
Programming is done easily in two ways:
Standard - Using the LCD screen and the 4 keys.
Optional - With the Bluebits smartphone App. The App communicates with the controller using a BLE (Bluetooth low energy) transmitter. This allows programing the FILTRON 1-10 from up to 10 meters away.
The standard power option for the DC version is 4 X “D” type alkaline batteries (Which can be purchased anywhere). The DC version can also be powered by a 12V DC power supply or a small solar panel and a small rechargeable battery. The standard power option for the AC version is the internal 110V AC / 220V AC to 24V AC transformer. The controller has an external manual backflush button, to quickly start / stop a backflush process without even opening the box. If there is a problem of continuous backflush cycles, the controller will detect it and switch to backflush by time only. The controller also alerts in case of a low battery situation.
FILTRON 1-10 是一款专业的模块化反吹控制器，最多可容纳 10 个过滤器。
不同的模块是 2/4/6/8/10 输出。输出可以操作 12V DC 锁定螺线管或 24V AC 螺线管，具体取决于它是 DC 还是 AC 版本。
它包括一个坚固而准确的嵌入式差压传感器，可以承受高达 18 巴的压力。可以选择使用外部机械 DP 传感器。 FILTRON 1-10 还允许连接外部压力传感器（也称为 Presostat），从而防止控制器在没有灌溉时执行不必要的反冲循环。反冲过程可以由时间、DP 或两者触发。控制器有一个定制的大液晶屏，显示所有反吹参数、实际状态、实际DP值和反吹统计。
编程很容易通过两种方式完成：
标准 - 使用 LCD 屏幕和 4 个键。
可选 - 使用 Bluebits 智能手机应用程序。该应用程序使用 BLE（低功耗蓝牙）发射器与控制器通信。这允许在最远 10 米外对 FILTRON 1-10 进行编程。
DC版本的标准电源选项是 4 X “D” 型碱性电池（可在任何地方购买）。DC版也可以用12V直流电源或小型太阳能电池板和小型充电电池供电。AC版本的标准电源选项是内部110V AC / 220V AC到24V AC变压器。控制器有一个外部手动反吹按钮，无需打开盒子即可快速启动/停止反吹过程。如果连续反吹循环出现问题，控制器将检测到它并仅按时间切换到反吹。控制器还会在电池电量不足的情况下发出警报。
TALGIL反吹控制器其他常用型号：
TALGIL FILTRON 1-10 24VAC
TALGIL FILTRON 20-30
TALGIL FT1 & BT
TALGIL FT1 & LCD
TALGIL DP INDUSTRIAL