您的位置:网站首页 >>行业资讯
热卖产品
联系我们

联系我们

联系人:赵经理
电话:18020505162(微信同号)
QQ:2885238181
邮箱:2885238181@qq.com
地址:无锡市锡山区安镇街道山河路50号浙大网新科创园41栋2102室

行业资讯

KALINSKY压力变送器DS1/DS2系列DS2-420技术参数

发布日期:2024-05-09 11:22:57

KALINSKY公司于1997年成立,是一家压力表、压力测量变换器、压力传感器、压力变换器以及无尘技术的制造商。为客户提供标准模型的具体设计,更改实施快速,低成本,可小批量。所有传感器符合CE认证和开发的低电压指令。

 

德国KALINSKY主要产品:

压力变送器

压力传感器

压力测量变换器

差压传感器

压力表

 

KALINSKY压力变送器DS1/DS2系列技术参数

Operation   temperature range:

-20 to + 50 °C

medium:

air and all non aggressive   gases

output signals   and power supply:

 

DS 2-010:

0-10 V  RL>= 2 kΩ  24VDC/AC+-10%

DS 2-420:

4-20 mA  RB<= 400 Ω  15-30 VDC

connections:

 

electrical:

screw clamps for   0.14 - 1.5 mm2

pneumatical:

2 connections   for tube with 4 mm or 6 mm diameter inside

cable gland:

PG 7

connection DS2-   010:

 

plug:

1 : + 24 VDC
2 : output 0 - 10 V
3 : GND

connection DS2-   420:

 

plug:

1 : + 24 VDC *
2 : output 4 - 20 mA *

 

KALINSKY压力变送器DS1/DS2系列产品介绍

描述:

DS1-010和DS2-420系列压力变送器适用于空气和非腐蚀性气体。它们测量差压和绝对压力,相对压力和可选的流速。模拟输出信号为0-10 V或4-20 mA或0-10 kHz。4-20 mA压力变送器采用双线技术实现。为了测量流速,可以订购平方根输出。由于压阻式电池DS1达到了很高的可靠性和精度。零信号与安装位置的相关性非常小。对超压的抵抗力高于使用其他物理原理。变送器采用坚固的铝制封装。这保证了良好的EMC特性。DS1可选配电子信号阻尼,电源24VAC或230 VAC。

 

测量范围:

DS1:0-0,25 mbar(25 Pa),步长可达 0-2 mbar(200 Pa)

DS2:0-2.5 mbar(250 Pa),步长可达 0-10 bar(1000 kPa)

 

Description:

The pressure transmitters of the series DS1-010 and DS2-420 is for using in air and non aggressive gases. They measure difference- and absolute pressure, relative pressure and optionally velocity of flow. The analog output signal is 0-10 V or 4-20 mA or 0-10 kHz. The 4-20 mA pressure transmitter is realised in two wire technic. For measurement of velocity of flow its possible to order the square root output. Because of the piezoresistive cell DS1 reach a high reliability and precision. The dependence of zero signal from mounting position is very small. The resistance against overpressure is higher than by using other physical principles. The transmitters are housed in a robust aluminium package. This guarantees good EMC-properties. Optionally DS1 can be completed with electronic signal damping, power supply 24VAC or 230 VAC.

 

Measurement ranges:

DS1:0-0,25 mbar (25 Pa) in steps up to 0-2 mbar (200 Pa)

DS2:0-2.5 mbar (250 Pa) in steps up to 0-10 bar (1000 kPa)

 

KALINSKY压力变送器DS1/DS2系列其他压力变送器型号:

KALINSKY DS1-010

KALINSKY DS1-420

KALINSKY DS2-010

KALINSKY DS2-420