LOGTAG产品用于大量不同的应用，包括广泛用于食品和药品温度或湿度监控，用于存储和运输。LOGTAG的产品还用于教育和研究，产品获得世界公认的多个组织的认可。
LOGTAG产品有：
多用途温度记录仪
多用途USB PDF温度记录仪
多用途USB PDF带显示屏
多用途低温记录仪
一次性低温记录仪
多用于外部探头
温度指示器
冻结温度指示器。
LOGTAG温度记录仪USRID-16W系列技术参数
|
Product Models
|
USRID-16WA/B
USRID-16WC
|
|
Sensor Measurement Range
|
-30°C to +60°C
|
|
Operating Temperature Range
|
-30°C to +60°C
|
|
Storage Temperature Range
|
-30°C to +55°C with device de-activated
|
|
Rated Temperature
Reading Accuracy
|
Better than ±0.5°C for -5°C to +30°C
Better than ±0.8°C or better for -30°C to +60°C
Actual performance is typically much better than the rated values. Accuracy figures can be improved by recalibration
|
|
Rated Temperature
Reading Resolution
|
Better than 0.1 °C between -20 °C to +55 °C
LogTag Analyzer currently displays to one decimal place of °C. The native resolution is what is stored in the LogTag®
|
|
Sensor Reaction Time
|
Typically less than 7 minutes (T90) in moving air (1m/s)
|
|
Recording Capacity
|
11,520 temperature readings (40 days at 5 minute logging)
|
|
Sampling Interval
|
Factory set at 5 minutes (non-changeable)
|
|
Logging Start Options
|
Push button start
|
|
Logging Stop Options
|
Push button stop
Stop after the logger has completed 11,520 temperature readings (40 days at 5 minute logging)
|
|
Alarms
|
3 alarms set at WHO requirements
|
|
Download Time
|
Typically with full memory in less than 20 seconds from time of insertion to availability of PDF report
Typically less than 10 seconds from time of insertion to availability of LTD file in LogTag® Analyzer 3
|
|
Environmental
|
Ingress rating: IP65 with USB cap fitted
Shock and Vibration: Unit shall pass a relevant level of shock and vibration based on the requirements of the Indicator specification E006/ TR07.3
Environmental resistance: Labels and plastics shall be resistant to a range of chemicals and UV, including rubbing alcohol and petrol fuel
|
|
Power Source
|
CR2032 3V LiMnO2 Battery (Non-Replaceable)
|
|
Battery Life
|
Minimum storage life of 18 months before ‘start’
Monitoring period: 40 days
Minimum accessibility (display) period of 6 months after ‘stopped’
|
|
Real Time Clock
|
Built-in real time clock
Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day)
Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C)
|
|
Connection Interface
|
USB 2.0, A-type plug
|
|
Software
|
PDF Reader, LogTag@ Analyzer 3 or higher
|
|
Size
|
93mm(H) X 54.5mm(W) X 8.6mm(T) including protective USB cap
|
|
Weight
|
31g
|
|
Case Material
|
Polycarbonate
|
LOGTAG温度记录仪USRID-16W系列介绍
产品概要
显示屏显示最多 3 个按 WHO 要求设置的警报的警报状态。它直接插入计算机 USB 以便于数据下载。
下载后，它会自动生成完整详细的 PDF 报告，并可选择使用免费提供的 LogTag ® Analyzer 软件下载数据以进行更详细的分析。
产品亮点
预认证符合 WHO PQS 规范 E006 温度监测设备
记录从 -30 °C 到 +60 °C 的温度
存储 40 天的温度记录数据，出厂设置为 5 分钟记录间隔。
只需按一下按钮，即可记录在途检查。
固定电池可提供 18 个月的存储，然后正常使用 40 天。
显示器显示温度和最多三个警报的警报状态。
无需特殊软件即可自动生成 PDF、CSV、LTD 报告。
集成 USB 连接器 - 无需单独的接口底座。
Product Summary
The display shows alarm status of up to 3 alarms set at WHO requirements. It plugs directly into the computer USB for easy data download.
Upon download, it automatically generates a fully detailed PDF report with the option to download the data using the freely available LogTag® Analyzer software for a more detailed analysis.
Product Highlights
Pre-Qualified compliant to WHO PQS specification E006 Temperature monitoring devices
Records temperature from -30 °C to +60 °C
Stores 40 days of temperature recordings data, factory set with a 5 minute logging interval.
In-transit inspections can be recorded at the push of a button.
Fixed battery provides 18 months storage, followed by 40 days normal use.
Display showing temperature and alarm status of up to three alarms.
Automatic generation of a PDF, CSV, LTD report without special software.
Integral USB connector - no separate Interface Cradle required.
LOGTAG温度记录仪USRID-16W系列其他常用型号：
LOGTAG USRID-16WA/B
LOGTAG USRID-16WC