LITTLE GIANT一直致力于开发设计空调暖通，管道，游泳池和水培专业的优质泵。
|
Specifications
|
|
|
Capacity
|
300 gph @ 1'
|
|
Shut Off
|
12.2' (3.72 m)
|
|
Max. Liquid Temp.
|
120 °F (49 °C)
|
|
Discharge
|
1/4" MNPT (6 mm)
|
|
Impeller
|
Nylon
|
|
Electrical
|
115 V, 60 Hz, 0.8 A
|
LITTLE GIANT清洗泵PE-2YSA介绍
PE-2YSA Parts Washer Pump
Little Giant's PE-2YSA parts washer pump is suitable for submerged use in parts washers using aqueous solutions or UL-listed solvents. This parts washer pump is intended to pump unheated metal parts cleaning solvents (classified as PJQU as described in the Gas and Oil Equipment Directory) and aqueous cleaning solutions (water-based solutions that should not be used in excess of 140 °F (60 °C) and a maximum pH of 12.)
Features & Benefits
1/40 hp epoxy encapsulated, direct-drive motor
300 gph @ 1' rise to 12 (2' max)
Glass-filled polyester housing
Nylon volute
Fluoroelastomer (FKM) shaft seal
Thermal overload protection
PE-2YSA 零件清洗泵
Little Giant 的 PE-2YSA 零件清洗泵适用于使用水溶液或 UL 列名溶剂的零件清洗机中的浸没式使用。 该零件清洗泵旨在泵送未加热的金属零件清洗溶剂（在天然气和石油设备目录中分类为 PJQU）和水性清洗溶液（水基溶液，其使用温度不应超过 140°F（60° C) 和 12 的最大 pH 值。)
特点与优势
1/40 hp 环氧树脂封装的直接驱动电机
300 gph @ 1' 上升到 12（最大 2'）
玻璃填充聚酯外壳
尼龙蜗壳
氟橡胶 (FKM) 轴封
热过载保护
LITTLE GIANT清洗泵其他常用型号：
LITTLE GIANT PE-2YSA