您的位置:网站首页 >>行业资讯
热卖产品
联系我们

联系我们

联系人:赵经理
电话:18020505162(微信同号)
QQ:2885238181
邮箱:2885238181@qq.com
地址:无锡市锡山区安镇街道山河路50号浙大网新科创园41栋2102室

行业资讯

Stefan Mayer磁场传感器FLC3-70-HT技术参数及介绍

发布日期:2024-05-09 14:34:29

Stefan Mayer在设计和制造低噪声磁力计、磁场消除系统和磁导率计方面拥有超过 25 年的经验。

 

 

Specifications

 

Measuring range

±200 µT @ 12 V supply   voltage,
  other ranges on request

Accuracy of   calibration data

±0.5% ± 0.05 µT

Orthogonality of meas.   directions

±1 ◦

Operating temperature

−5 ◦C to +175 ◦C

Zero drift

<5 nT/K (15 ◦C to   175 ◦C)

Supply voltage V+ − V−

4.8 V to 12 V DC

Supply current

∼10 mA

Reference output OUT−

(V+ − V−)/2 ±1%

Output voltages X, Y ,   Z ref. to OUT−

±1   V/35 µT, max. ±(V+ − V−)/2

Bandwidth

0 to 1 kHz (−3 dB)

Ripple @ excitation   freq. = 16 kHz

typ. 3 mVrms

DC output impedance

100 Ω

Noise

<0.5 nTRMS or 3   nTPP (0.1 Hz to 10 Hz),
  typ. 120 pT/√ Hz @ 1 Hz

Dimensions

diam. 25 mm × 50 mm

Weight

33 g

Enclosure

PEEK, bone

Connection cable

6 conductors

 

Stefan Mayer磁场传感器FLC3-70-HT产品介绍

描述

磁场传感器 FLC3-70-HT 是一款三轴微型磁通门磁力计,用于测量高达 200 µT 的弱磁场。 该传感器可用于传统磁场传感器(霍尔或 MR 传感器)的灵敏度和稳定性太低的任何应用中,例如用于测量地球磁场(用于导航或磁层研究)。

 

FLC3-70-HT 是一款完整的三轴磁通门磁力计。 模拟输出电压与磁场的三个分量 X、Y 和 Z 成比例。

 

由于其 4.8 V 至 12 V 的单电源电压和低电流消耗,它是电池供电或 µP 控制应用的理想选择。

 

FLC3-70-HT 是标准 FLC3-70 传感器的高温版本。 它可以在高达 175°C 的温度下运行,适用于深钻和太空应用。

 

Description

The magnetic field sensor FLC3-70-HT is a triaxial miniature fluxgate magnetometer for the measurement of weak magnetic fields up to 200 µT. This sensor can be used in any application where the sensitivity and stability of conventional magnetic field sensors (Hall or MR sensors) is too low, e. g. for the measurement of the earth’s magnetic field (for navigation or magnetospheric research).

 

The FLC3-70-HT is a complete three axis fluxgate magnetometer. The analog output voltages are proportional to the three components X, Y and Z of the magnetic field.

 

Due to its single supply voltage of 4.8 V to 12 V and low current consumption it is the ideal choice for battery powered or µP controlled applications.

 

The FLC3-70-HT is a high temperature version of the standard FLC3-70 sensor. It can be operated at temperatures up to 175 ◦C and is suitable for deep drilling and space applications.

 

Stefan Mayer磁场传感器其他常用型号:

Stefan Mayer FLC3-70-HT