霍尼韦尔（HONEYWELL）为全球客户提供专业的相关行业解决方案，涵盖航空和汽车产品及服务，楼宇、住宅和工业控制技术，以及特性材料。从飞机、汽车、住宅、楼宇、制造工厂、供应链到人员，HONEYWELL的技术致力于万物互联，创造一个更智能、更安全和更可持续发展的世界。
HONEYWELL的主要产品有：传感器，继电器，电机，行程开关，限位开关，压力开关，温控仪，点火控制器，变压器，模块，放大器，阀，火焰探测器，执行器等。
|
Item
|
Specification
|
|
Rated voltage
|
110..115Vac or 220..230Vac, 50/60Hz -15 ~ +10%
|
|
Allowable ambient temperature
|
Stand-alone mounting: -20 ~ +60℃
Parallel mounting (2 or more sets) : -20 ~ +45℃
|
|
Protection Class
|
IP00 (mount inside cabinet)
|
|
Allowable ambient humidity
|
Max. 90% RH non condensing
|
|
Vibration resistance
|
0.5G (10 to 150Hz for 1h each in x,y and z directions)
|
|
Insulation resistance
|
More than 50MΩ at DC500V between terminals and ground
|
|
Life expectancy
|
Designed for 10 years of operation or 250.000 cycles under nominal conditions
|
|
Terminal ratings
|
Relay output max 1A @ cosφ=1,0 per terminal
|
|
Flame strength
|
Flame On : > 1V
Flame Off : < 0.2V
|
|
Size (WxHxD)
|
42.5 x 90.0 x 95.5 mm (including sub-base)
|
|
Weight
|
Approx. 334g (including sub-base)
|
HONEYWELL火焰开关BC1000系列介绍
BC1000A/B系列是用于间歇操作的火焰开关，用于指示火焰的存在或不存在，适用于商业或工业燃烧器装置。 BC1000A 也可用作使用启动/停止站的手动燃烧器系统的主要控制装置。
除了火焰感应功能外，BC1000A/B 还提供“安全启动”功能，用于检查设备通电时是否存在火焰信号。 如果是这样，BC1000A/B 将保持其运行，直到火焰信号消失。
BC1000A/B可与整流火焰棒或所有现有的非自检霍尼韦尔“PowerTube”型紫外线传感器一起使用（仅用于间歇操作）。
1) 紧凑的设计。
2) 用于直接面板或 DIN RAIL 安装的插入式接线底座。
3) 安全启动检查 (SSC) 功能可防止启动时出现异常火焰情况时运行。
4) 正面的LED指示（Power、Flame、SSC）显示运行状态（SSC隐藏在前盖后面）。
5) 正面螺丝端子提供连续0~6VDC火焰信号强度监测。
The BC1000A/B series is a flame switch for intermittent operation to indicate presence or absence of a flame and to be applied in commercial or industrial burner installations. The BC1000A can also be used as a primary control for manually operated burner systems using a start/stop station.
In addition to the flame sensing functions, the BC1000A/B provides a “Safe Start” function which checks if a flame signal is present when applying power to the device. If so, the BC1000A/B holds its operation until the flame signal disappears.
The BC1000A/B can be used with a recifying flame rod or all existing non-selfcheck Honeywell “PowerTube” type UV sensors (for intermittent operation only).
1) Compact design.
2) Plug-in wiring sub base for direct panel or DIN RAIL mounting.
3) Safe-start check (SSC) feature prevents operation when abnormal flame condition exists at start-up.
4) LED indication (Power, Flame, SSC) on the front to show operation status (SSC hidden behind the front cover).
5) Screw terminals on the front provide continuous 0~6VDC flame signal strength monitoring.
HONEYWELL火焰开关BC1000系列其他常用型号：
HONEYWELL BC1000A0110F
HONEYWELL BC1000A0110U
HONEYWELL BC1000A0220F
HONEYWELL BC1000A0220U
HONEYWELL BC1000B1000
HONEYWELL BC1000B1018
HONEYWELL BC1000B2001
HONEYWELL BC1000B2019
HONEYWELL BC1000A0220U/E