CD Automation提供工业电力控制完整解决方案。
CD Automation产品包括SCR功率控制器、软启动器、固态继电器和温度控制器等。
Technical Specification
|
|
Load type:
|
Normal resistance, infrared long and medium waveform
|
Inputs:
|
SSR Standard, 0:10V, 4:20mA and Heater Break alarm are options
|
Firing mode:
|
Zero Crossing, Burst Firing available with analogue input only
|
Operating temperature:
|
0 to 40°C without derating
|
Comply with
|
EMC, cULus® 508 listed and cUL® listed up to 500A as an option
|
100 kA:
|
Short Circuit Current rating (SCCR) up to 600V, 500A
|
Analog input:
|
4/20 mA or 0/10V
|
Current Transformer mounted inside
|
|
Current Transformer + HB Alarm
|
|
CD Automation继电器REVO S 3PH系列介绍
• Revo S 3PH是一款三相静态继电器,适用于驱动带或不带中性线和三角形的三相星形连接的负载。该装置旨在节省空间和工作。
• 电流范围 – 30A、35A、40A、60A、75A、90A、120A、150A、180A、210A、300A、350A、400A、450A、500A、800A
• 电压范围 480V、600V 和 690V(从 60A 开始),+/-10%
• 与电源完全隔离
• 过零点火模式 (ZC) 或连发点火(可选择 4、8 或 16 个循环)
• 逻辑输入信号 4 至 30V DC 典型 (SSR) 加上 4-20mA 或 0-10V DC 线性输入作为选项
• 恒定电流消耗,与 SSR 输入的电源电压无关
• 加热器断线 (HB) 警报可通过自动设置、继电器警报输出和前 LED 指示来诊断部分或全部负载故障。作为选项提供
• 并排安装
• 具有高耗散值的特殊设计散热器
• IP20防护
• Revo S 3PH is a three phases static relay suitable for driving loads with star connection with or without neutral and delta on three phases. The unit has been designed to save space and work.
• Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 350A, 400A, 450A, 500A, 800A
• Voltage Range 480V, 600V and 690V (starting from 60A), +/-10%
• Fully isolated from the power
• Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
• Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
• Constant current drain, independent of supply voltage with SSR input
• Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
• Side by side mounting
• Special design Heatsink with high dissipation value
• IP20 protection
CD Automation继电器REVO S 3PH系列其他常用型号:
CD Automation RS3040-44A40F0021
CD Automation RS3030-44V80H0021
CD Automation RS3030-44V80H0021
CD Automation RS3040-40SZ0F0021