AMCI成立于1985年。AMCI公司提供24/7技术支持人员，回答有关所有AMCI产品的安装，配置和操作的问题。
AMCI主营产品：
AMCI编码器
AMCI传感器
AMCI变压器
AMCI编码器
AMCI控制器
AMCI驱动器
AMCI电机
AMCI电缆
AMCI连接器
AMCI继电器
AMCI继电器板
AMCI远程显示器
AMCI可编程限位开关
AMCI关联分解器
|
SPECIFICATIONS
|
|
|
Mechanical
|
|
|
Shaft Loading:
|
Radial: 100 Ibs. max.
Axial: 50 lbs. max.
Bearing life rated at 2X10* revolutions
minimurm at specified shaft load.
|
|
Starting Torque:
|
8 oz.in. @ 25°C
|
|
Moment of Inertia:
|
8. 75X104 oz-in-sec2 max.
|
|
Weight:
|
4 Ibs
|
|
Environmental
|
|
|
Shock:
|
50 g's for 11 milliseconds
|
|
Vibration:
|
15 g's to 2000 Hz
|
|
Operating Temp:
|
-40 to 125°C (-40 to 257°F)
|
|
Enclosure:
|
Powder Coated Aluminum Body Anodized Aluminum F lange 1070 Carbon Steel Shaft IP64 when connector properly sealed
|
AMCI编码器HTT-20系列产品介绍
HTT-20-X BRUSHLESS MULTI-TURN RESOLVER TRANSDUCER
Many applications require high-resolution, multi-turn position sensing. In response to market demands, AMCI engineered the HTT-20 series of IP64 rated resolver transducers to provide absolute position feedback for up to 1,800 turns with a maximum resolution up to 4,096 counts/turn. The actual number of counts per turn depends on the transducer and the electronics used to decode the position.
Each transducer contains two resolvers that are geared together in a vernier arrangement. For the 100 turn and 180 turn transducers, this arrangement requires only two gears. This mechanical simplicity makes the HTT-20 transducers more reliable then transducers that have a multi-pass gear train between the two resolvers. The 1,000 and 1,800 turn transducers are also mechanically simple, having only a single pass 10:1 gear ratio between the input shaft and the two vernier resolvers. This mechanical simplicity allowed AMCI to design the HTT-20 transducers as a space saving, compact package. These resolver transducers have a 5/8" keyed shaft, AMCI's standard 1/4" X 20 mounting holes, sealed bearings, and a mil-spec connector.
AMCI offers a complete line of resolver interface solutions, enabling you to easily configure a resolver-based position feedback system in your favorite PLC, PAC, or network.
HTT-20-X 无刷多圈旋转变压器
许多应用需要高分辨率、多圈位置传感。为响应市场需求，AMCI 设计了 HTT-20 系列 IP64 级旋转变压器传感器，可提供高达 1,800 转的绝对位置反馈，最大分辨率高达 4,096 计数/转。每转的实际计数取决于传感器和用于解码位置的电子设备。
每个换能器包含两个旋转变压器，它们以游标排列方式连接在一起。对于 100 转和 180 转传感器，这种布置只需要两个齿轮。这种机械简单性使 HTT-20 传感器比在两个旋转变压器之间具有多通道齿轮系的传感器更可靠。 1,000 和 1,800 转传感器的机械结构也很简单，在输入轴和两个游标旋转变压器之间只有一个单程 10:1 的齿轮比。这种机械简单性使 AMCI 能够将 HTT-20 传感器设计为节省空间的紧凑型封装。这些旋转变压器传感器具有 5/8" 键轴、AMCI 的标准 1/4" X 20 安装孔、密封轴承和军用规格连接器。
AMCI 提供完整的旋转变压器接口解决方案系列，使您能够在自己喜欢的 PLC、PAC 或网络中轻松配置基于旋转变压器的位置反馈系统。
AMCI编码器HTT-20系列其他常用型号：
AMCI HTT-20-100
AMCI HTT-20-180
AMCI HTT-20-1000
AMCI HTT-20-1800