VAISALA开发,制造和营销用于环境和工业测量的创新产品和服务。在工业测量业务领域为生命科学,电力传输和目标工业应用的工业客户提供服务。
主要经营范围有:
VAISALA温湿度温湿度探头
VAISALA温湿度变送器
VAISALA二氧化碳温湿度探头
VAISALA压差变送器。
Property
|
Description/Value
|
Hydrogen peroxide
|
|
Sensor
|
PEROXCAP
|
Measurement range
|
0 ... 2000 ppm
|
Measurement temperature range
|
+5 ... +50 °C (+41 ... +122 °F)
|
Repeatability at +25 °C (+77 F)
|
|
up to 500 ppm H2O2
|
±10 ppm
|
up to 1000 ppm H2O2
|
±15 ppm
|
Accuracy (including non-linearity, hysteresis, and repeatability)
at +10 ... +25 °C (+50 … +77 °F) , 10 ... 2000 ppm H2O2
|
±10 ppm or 5 % of reading (whichever is greater)
|
Factory calibration uncertainty, at +25 °C (+77 °F), 500 ppm H2O2
|
±10 ppm
|
Response time at +23 °C (+73 °F):
|
|
Response time (T63)
|
70 s
|
Response time (T90)
|
200 s
|
Other parameters
|
|
H2O ppm by volume
|
|
Operating voltage
|
Digital output: 15 ... 30 VDC
Analog output: 15 ... 25 VDC
|
Current consumption at +25 °C (+77 °F)
|
|
In digital mode
|
Max. 10 mA
|
In analog mode
|
Max. 50 mA
|
During purge
|
Max. 250 mA
|
Digital output
|
|
Interface
|
RS-485, not isolated; do not use termination on the RS-485 line
|
Bit rate
|
9600, 19200 (default), 38400, 57600, or 115200 bps
|
Parity
|
None (default), even, odd
|
Data bits
|
8
|
Stop bits
|
1, 2 (default)
|
Communication protocol
|
Modbus RTU v.1.02
|
Analog output
|
|
Outputs
|
2 × 4 ... 20 mA 3-wire current outputs
|
Max. load
|
500 Ω
|
Accuracy
|
±0.1 % of full scale
|
Analog output temperature dependence
|
0.005 %/˚C (0.003 %/°F) full scale
|
Operating environment
|
|
Operating temperature
|
+0 ... +70 °C (+32 ... +158 °F)
|
Storage temperature
|
-20 ... +70 °C (-4 ... +158 °F)
|
Ambient pressure
|
Normal atmospheric pressure
|
EMC compliance
|
EN/IEC 61326-1, Industrial Environment
|
Mechanical specifications
|
|
Weight
|
110 g (3.88 oz)
|
IP rating
|
IP65
|
Connector
|
M12/5 male
|
Materials
|
|
Probe body
|
AISI316L stainless steel
|
Filter cap
|
Porous PTFE
|
VAISALA温湿度探头HPP271产品介绍
• VAISALA PEROXCAP™ H2O2 测量技术具有出色的长期稳定性。
• 汽化 H2O2 测量范围 0 ... 2000 ppm。
• 坚固的设计允许温湿度探头直接安装在过程环境中。通电时,温湿度探头可承受 H2O2 和 H2O 冷凝。温湿度探头还可以承受氮气。
• 传感器上的保护过滤器设计用于承受高空气流速和湍流。
• 传感器加热以避免传感器上的冷凝。
• 化学清洗以优化性能和使用寿命。
• H2O2 和H2O 浓度测量的压力补偿。
• 数字输出:用于 Modbus 通信的 RS-485 接口。
• 模拟输出:2 x 4 ... 20 mA。
• 易于插入、拔出。
• 使用常规湿度校准器或 H2O2 蒸汽进行现场校准和调整。
• 可用作独立温湿度探头或与Vaisala Indigo 200 系列变送器一起使用。
• 可以连接到 Vaisala Insight 软件进行校准和调整、配置、诊断和临时在线监控。
• Vaisala PEROXCAPâ H2O2 measurement technology with excellent long-term stability.
• Vaporized H2O2 measurement range 0 ... 2000 ppm.
• Robust design allowing the probe to be installed directly in the process environment. When powered on, the probe withstands H2O2 and H2O condensation. The probe also withstands nitrogen gas.
• Protective filter over the sensors designed to withstand high air flow rates and turbulence.
• Sensor heating to avoid condensation on the sensors.
• Chemical purge for optimized performance and lifetime.
• Pressure compensation for H2O2 and H2O concentration measurement.
• Digital output: RS-485 interface for Modbus communication.
• Analog output: 2 x 4 ... 20 mA.
• Easy plug-in, plug-out.
• Field calibration and adjustment with a regular humidity calibrator or with H2O2 vapor.
• Can be used as a stand-alone probe or with Vaisala Indigo 200 series transmitters.
• Can be connected to Vaisala Insight software for calibration and adjustment, configuration, diagnostics, and temporary online monitoring.
VAISALA温湿度探头HPP270系列其他常用型号:
VAISALA HPP271
VAISALA HPP272