OEM Dynamics Pty Limited 是一家澳大利亚人拥有和经营的公司，自1975年以来一直活跃于机械动力传输和传热产品的制造和供应
|
VCL= Special Applicaion Coolers
|
|
6=BASIC MODEL NUMBER
|
|
X = Aluminium Hi-Flow 65mm - Operating pressure 14 Bar
|
|
H = Hydraulic Motor.
|
|
F = Hydraulic motor small orbit Eaton J/Sam BGM/ EPMM/Danfoss OMM/etc. 16 mm shaft
|
|
00 = No Motor unit.
|
|
SS
|
DYNACOOL换热器介绍
• Features the higher performance of the regular Versacool range with the added capacity to fit a wide range of special electric motors, larger type hydraulic motors or air motors and/or stainless steel case construction.
• AC motor mountings include IEC foot mounted 71,80 and 90 frame or NEMA 48, 56, and 143 frame single or 3 phase in most voltages and specifications.
• Where large 24 volt DC fan driven Versacool models are required such as VC6 or VC7 we can supply them as VCL6XDC20 or VCL7XDC20 models. For performance see curves shown on page 12.
• Where large or irregular hydraulic fan motors not available in regular Versacool models are required, VCL series may be used.
• VCL4, VCL6 and VCL7 models are available with 304 stainless steel casings and brackets.
• 具有常规 Versacool 系列的更高性能，并增加了容量以适应各种特殊电动机、大型液压马达或气动马达和/或不锈钢外壳结构。
• 交流电机安装包括 IEC 底脚安装的 71,80 和 90 框架或 NEMA 48、56 和 143 框架单相或大多数电压和规格的三相。
• 如果需要大型 24 伏直流风扇驱动 Versacool 型号，例如 VC6 或 VC7，我们可以提供 VCL6XDC20 或 VCL7XDC20 型号。 有关性能，请参见第 12 页上显示的曲线。
• 如果需要常规 Versacool 型号中没有的大型或不规则液压风扇马达，则可以使用 VCL 系列。
• VCL4、VCL6 和VCL7 型号提供304 不锈钢外壳和支架。
DYNACOOL换热器其他常见型号：
DYNACOOL VCL6XHF00SS
DYNACOOL VCL4XA
DYNACOOL VCL5NA
DYNACOOL VCL6XA
DYNACOOL VCL7XA