C3CONTROL生产耐用，设计精良的电气控制产品，即使在最恶劣的环境中也能可靠运行，并且符合全球质量和安全标准。从电源和驱动到控制逻辑，从人机界面到布线/电缆管道，C3CONTROL提供的产品可以执行基本控制面板功能。
|
Operator Type
|
22mm Potentiometer Operator
|
|
Resistance
|
10k
|
|
Clamp Ring
|
Black Polyester (Type 4X)
|
|
Terminal Block
|
Terminal Block installed and wired
|
C3CONTROLS电位器22POTO10K-TBW产品介绍
• 单圈标准 2 瓦电位器，电阻范围选项为 1k 至 10k。
• 三点接线端子和硬件。
• 接线盒套件可以单独订购，也可以在工厂安装并连接至电位计操作器。
• 可选聚酯或抛光铝夹环。
• 带有自升式系留线夹的#6 端子螺钉可通过每个端子的两根#12 AWG 电线（0.5-4mm 2 ）容纳#22。
• 所有摩擦部件均采用内部自润滑模制而成，可提供出色的耐磨性，而无需使用其他麻烦的润滑脂。
• U 形杯密封件注入了聚四氟乙烯涂层，可消除暴露在恶劣条件下时出现的裂纹。
• 坚韧的聚酯结构采用工业级塑料制成，强度高、重量轻，可提供电气绝缘、耐腐蚀和防潮。
• Single-turn standard 2 watt potentiometer with resistance range options from 1k to 10k.
• Three point terminal block and hardware.
• Terminal block kit may be ordered separately or installed and wired at the factory to the potentiometer operator.
• Optional polyester or polished aluminum clamp rings.
• #6 terminal screws with self-lifting captive wire clamps accommodate #22 through two #12 AWG wires (0.5-4mm2) per terminal.
• All frictional parts are molded with an internal self-lubricant to provide outstanding wear without troublesome greases used by others.
• Our revolutionary U-Cup seal is infused with a Teflon coating to eliminate cracking when exposed to harsh conditions.
• Manufactured with industrial grade plastics for strength and less weight, the tough polyester construction provides electrical insulation, resists corrosion, and rejects moisture.
C3CONTROLS电位器其他常用型号：
C3CONTROLS 22POTO1K-TBW
C3CONTROLS 22POTO2.5K-TBW
C3CONTROLS 22POTO5K-TBW
C3CONTROLS 22POTO10K-TBW
C3CONTROLS POTOA1K-TBW
C3CONTROLS POTOA2.5K
C3CONTROLS POTOA5K-TBW
C3CONTROLS POTOA10K-TBW
C3CONTROLS POTO1K-TBW
C3CONTROLS POTO2.5K-TBW
C3CONTROLS POTO5K-TBW
C3CONTROLS POTO10K-TBW