AMC成立于1987年，设计制造和销售高性能伺服驱动器和电机控制器。从完整的PWM伺服控制到定制伺服解决方案，AMC提供有刷和无刷电机驱动器，所有这些驱动器都是利用在数字伺服技术方面的进步和经验丰富的模拟伺服知识而设计的。
AMC的产品用于众多行业，包括制造业，娱乐业，机器人技术和医疗保健等。
|
SPECIFICATIONS
|
|
|
Current Continuous (A)
|
60
|
|
Current Peak (A)
|
120
|
|
DC Supply Voltage (VDC)
|
20 - 80
|
|
Network Communication
|
None
|
|
Size (mm)
|
254 x 130.2 x 48.7
|
|
Weight (g)
|
1140
|
AMC伺服驱动器120A10产品介绍
120A10 PWM伺服驱动器设计用于以高开关频率驱动有刷直流电机。单个红/绿 LED 指示操作状态。该驱动器具有全面的保护，防止过压、欠压、过流、过热以及电机、接地和电源线之间的短路。此外，该驱动器可以与数字控制器连接或独立使用，并且仅需要一个未稳压的直流电源。环路增益、电流限制、输入增益和偏移可以使用 14 圈电位器进行调整。 失调调节电位器还可用作板载输入信号以进行测试。
The 120A10 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against over-voltage, under voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14- turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes.
AMC伺服驱动器120A系列其他常用型号：
AMC 120A10
AMC 120A10B-24
AMC 120A10B-24NH
AMC 120A10B-NH
AMC 120A5