SPM在基于状态的维护和过程优化方面的广泛产品系列为几乎所有类型的状态监测提供智能、经济高效和完整的解决方案。
SPM振动传感器TRV系列技术参数
Technical data
|
|
Nominal sensitivity, main axis:
|
4.0 mV/m/s2
|
Transverse sensitivity:
|
max. 10%
|
Typical base strain sensitivity:
|
0.01 m/s2/µ strain
|
Linear frequency range:
|
2 to 5000 Hz
|
Max. peak acceleration:
|
600 m/s2
|
Temperature range:
|
-20° C to +125° C (-4° F to +260° F)
|
Power requirements:
|
12–24 V, 2–5 mA
|
Casing:
|
Stainless acid proof steel,
Sandvik Grade:1802,
EN:1.4523
|
Design:
|
Sealed
|
Connector tightness
|
IP65 with TNC connector
IP 67 with conn. SPM13008
|
Weight:
|
135 grams (5 oz)
|
Connector type:
|
TNC
|
Torque limit:
|
10 Nm (7.4 lbf · ft)
|
Bias point:
|
6 to 12 V (typ 8 V)
|
SPM振动传感器TRV系列介绍
传感器 TRV-20 和 TRV-21 是带有内置前置放大器的压缩型压电加速度计,专为工业机械的振动监测而设计。 该传感器与 CMS 系统(测量单元 VCM)和手持式仪器 Leonova 一起永久安装。 传感器和测量单元之间的电缆长度不超过50 m(165 英尺)。
传感器安装在机器上光滑平坦的表面上。 TRV-20 的螺纹尺寸为 M8,TRV-21 的螺纹尺寸为 UNF 1/4"-28。传感器附带三个垫圈,用于调整连接器角度。每个垫圈将传感器旋转 90°。同轴电缆(SPM 90005-L 或 带有 TNC 连接器的 90267-L) 必须用靠近传感器的夹子固定。
在潮湿环境中,请使用密封 TNC 电缆插头 SPM 13008 以防止电缆腐蚀。 对于电气绝缘,请使用绝缘安装脚 TRX-18/19。
The transducers TRV-20 and TRV-21 are piezo-electric accelerometers of compression type with built-in preamplifier, designed for vibration monitoring of industrial machinery. The transducers are used in permanent installations with the CMS System (measuring unit VCM) and with the hand-held instrument Leonova. The cable length between the transducer and the measuring unit is max. 50 m (165 ft).
The transducer is mounted against a smooth, flat surface on the machine. TRV-20 has thread size M8 and TRV-21 has UNF 1/4"-28. The transducers are delivered with three washers for adjusting the connector angle. Each washer turns the transducer 90°. The coaxial cable (SPM 90005-L or 90267-L) with TNC connector must be secured with a clamp close to the transducer.
In moist environments, use sealing TNC cable plugs SPM 13008 to prevent cable corrosion. For electric insulation, use insulated installation foot TRX-18/19.
SPM振动传感器TRV系列其他常用型号:
SPM TRV-20
SPM TRV-21