Reliably remove particles from inert gases with flow rates up to 30 slpm.
- Provide efficient, low-cost, point-of-use filtration of inert gases
- > 99.9999999% removal of all particles greater than 0.015 µm diameter
| Materials |
Membrane: |
Hydrophobic fluoropolymer PTFE |
| |
Supports, housings: |
PFA |
| Recommended flow rate |
30 slpm |
| Connections |
1/8", 1/4" compression seal |
| Membrane area |
12 cm2 (1.9 in2) |
| Particle retention |
>99.9999999% removal of all particles greater than 0.0015 μm diameter (verified at the most penetrating particle size) |
| Operating conditions |
Maximum operating pressure: |
0.41 MPa (4.1 bar, 56.6 psid) at 20°C |
| |
Maximum forward differential pressure: |
0.34 MPa (3.4 bar, 50.0 psid) at 20°C |
| |
Maximum reverse differential pressure: |
0.03 MPa (0.3 bar, 4.35 psid) at 20°C |
| |
Maximum operating temperature: |
50°C (122°F) |
| Dimensions |
Length: |
1/8" seal: 69 mm (2.7”)
1/4" seal: 71.5 mm (2.8”) |
| |
Diameter: |
21.5 mm (0.85”) |